Wanted some underwater transom lights.
i liked the looks of the Atwood light armor lights. So I got 4 of them.
they have 12 leds each and are 3250 lumens each.
first, I had to pick spots that weren't going to interfere with th surfplates and that were pretty flat.
the drilling is easy after doing a ballast add. I then wired them into the existing surf light wires and switch.
then I put some string leds on the swim deck. I took off the rubrail, and ran the string through a length of 11/4" clear tubing. I used the stainless rubrail bracket to hold the tubing in place. It is pretty tough to keep the stainless lined up and not screw the lights. So a helper is a big plus. I wired this into the surf lights also.
next, I ran 6-6" led floods on the tower and ran the wires to the front ones to the tower light switch. I put green and red film over the front facing for"navigation"
the four rearfacing, I ran to an accy. switch.
.thumb.jpeg.d318255b96edd9f88e9a0da37ff83595.jpeg)
.thumb.jpg.d6e1f49476f0797b86e8afb53e7c3295.jpg)
Visit the
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now