Muffler delete.

Share your completed boat projects! DIY or Professional Installs

Imagine a single giant database of boat projects for all brands, organized by category, boat type or budget. Share your projects, find inspiration for a new upgrade, or learn the basics or low budget solutions from projects before you. We can all share and learn from each other in one place.

No project is too plain, cheap or lame to post... all will be helpful to someone. Let's build this thing!

Please register or log in first:

1) Pick a category

2) Click "Add New Project"

3) Update your project anytime!

***Professional Shops are also welcome to showcase custom work for any category, but you must designate your company name under "installation shop" with included info.

Muffler delete.
By TFreeman

October 25, 2020
Year: 2008 Brand: Supra Model / Trim: Launch 22ssv Cost: $0-$249 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Cat 340
Share

Followers 0
Ultra basic muffler deletes to go with fresh air exhaust.

I bought a pair of 3.5" stainless 60* exhaust elbows on Amazon. Remove factory muffler. Cut off about an inch off each end of the elbows. Probably could have gone up to 2" off each end. Then install elbows in place of muffler.
2
- Report Project
Share
Followers 0
Go to projects

User Feedback
- 5 Comments
Recommended Comments

Rugger 683

Posted October 25, 2020

Report reply

Share this comment

Nice. Can you "update" and then add the picture of the engine compartment in the main write-up? It's only in the "title image" , so it's small.

Love that sound!   Did you guys get a lot of time on the boat this year?

Link to comment

Share on other sites

TFreeman 111

Posted October 25, 2020

Report reply

Share this comment

3 hours ago, Rugger said:

Nice. Can you "update" and then add the picture of the engine compartment in the main write-up? It's only in the "title image" , so it's small.

Love that sound!   Did you guys get a lot of time on the boat this year?

Done. We spent alot of time out this year. It was a great decision to upgrade.

1

Link to comment

Share on other sites

Toddgordo 0

Posted April 14, 2021

Report reply

Share this comment

How much louder is it at surf speed? Which motor do you have?

Link to comment

Share on other sites

TFreeman 111

Posted April 15, 2021

Report reply

Share this comment

23 hours ago, Toddgordo said:

How much louder is it at surf speed? Which motor do you have?

I haven't been on the water with it yet. Honestly I'm expecting no increase in sound for the rider as the noise is still well below the water line upon exit.

I've read of decreased noise in the boat as it's no longer in the muffler. I'm hoping this is the case.

I have the indmar CAT 340. Honestly I think it's quieter out of the water then my old nautique with the 351 and factory mufflers.

Link to comment

Share on other sites

TFreeman 111

Posted April 29, 2021

Report reply

Share this comment

After being on the water and behind the boat specifically, Its definitely not louder w/o the muffler. The wave still makes more noise then the exhaust. Inside the boat...I want to say it's a bit quieter without the engine noise in the muffler but I can't be sure. But with the additional space under the motor cover I would do it again

Link to comment

Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!
Register a new account

Sign in

Already have an account? Sign in here.
Sign In Now
Featured Products
- LARGE - XL (7 5/8" - 8") Wake Garage Vintage cap
  
  $24.99
  
  In Stock
- Wake Garage decal - Metallic Red
  
  $10
  
  In Stock
- Wake Garage decal - Metallic Blue
  
  $10
  
  In Stock
- Wake Garage decal - Black
  
  $10
  
  In Stock
- Wake Garage decal - White
  
  $10
  
  In Stock
- Wake Garage decal - Orange
  
  $10
  
  In Stock
- ADJUSTABLE Charcoal/Neon Blue Wake Garage Snapback
  
  $24.99
  
  In Stock
- ADJUSTABLE Charcoal/Neon Orange Wake Garage Snapback
  
  $24.99
  
  In Stock
- Surf Wave Selector - MOMENTARY SWITCH (WG2B)
  
  $24.99
  
  In Stock
- Surf Power Switch (w/ Red LED (WG1R)
  
  $24.99
  
  In Stock
- SMALL-MEDIUM FLEXFIT BLACK COOL/DRY SPORT
  
  $24.99
  
  In Stock
- Go Surf Assist - Complete System
  
  $4,599.99
- GSA Surf Controller Only
  
  $1,499.99
- Surf Wave Selector - NON-MOMENTARY w/ LEDs (WG2A)
  
  $28.99
  
  Out of Stock
- Surf Power Switch w/ White LED (WG1W)
  
  $24.99
  
  In Stock
Tell a friend
Love Wake Garage? Tell a friend!
- Email
- Share

Most Completed Projects
1. Wylie_Tunes (21),
2. Rugger (20),
3. TFreeman (11),
4. Hyperryd (11),
5. SONICJK (10),
6. cowwboy (8),
7. TimbrSS (7),
8. Oldyella66 (7),
9. berndtmj (7),
10. Gravity (6),
11. tunafoot (6),
12. Jhartt3 (5),
13. tylerstrop (5),
14. Jeffo (5),
15. John E Travland (4),
16. Toddington111 (4),
17. Shadetreefab (4),
18. Y-Naut-Ski (4),
19. MartinArcher (4),
20. JWALL (4),
21. soder (4),
22. Setter (4),
23. jfthunder (4),
24. Brit_hunsicker (4),
25. Dale974 (4)
Recently Updated Completed Projects
- 2013 MB B52 DIY flooring install
  
  Year: 2013 Brand: MB Sports Model / Trim: B52 Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By T13MB, September 1
  - 1 comment
  - 87 views
  - Comment by formulaben
  - September 1
- Wake Surf Board Leash
  
  Year: 2023 Brand: (unspecified) Cost: (unspecified) DIY or Professional Install: (unspecified)
  
  By Norm2020, June 16
  - 0 comments
  - 150 views
  - Added by Norm2020
  - June 16
- Better than “Fake-a-Lake”
  
  Year: 2007 Brand: Calabria Model / Trim: Pro V2 Device Type : Suction Cup Gate Style Surf Device Material: N/A Purchased System Control: Unspecified Cost: (unspecified) Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Fiberglass Engine Type: Mercury Mercruiser 5.7L Black Scorpion 330 Material used: Other Project Title : Better than “Fake-a-Lake”
  
  By Marc36, May 25
  - 0 comments
  - 247 views
  - Added by Marc36
  - May 25
- New Dash
  
  Year: 2000 Brand: Tige Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By AllFAB, January 28
  - 2 comments
  - 480 views
  - Comment by AllFAB
  - January 29
- Lily mount
  
  Year: 2000 Brand: Tige Model / Trim: 21v riders Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: (unspecified) Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Teak Engine Type: 350 Material used: (unspecified) Project Title : Lily Mount
  
  By AllFAB, January 26
  - 1 comment
  - 360 views
  - Comment by Rugger
  - February 18
- Rear Ballast Compartment Storage
  
  Year: (unspecified) Brand: Malibu Model / Trim: VTX, LVS Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By Norm2020, December 20, 2022
  - 2 comments
  - 866 views
  - Comment by Rugger
  - February 18
- Fresher Air Than Stock Exhaust (Turn Downs)
  
  Year: 1998 Brand: Centurion Model / Trim: Elite Cost: $0-$249 DIY or Professional Install: I installed it / created it Platform Type: Teak Engine Type: 5.7 Mercruiser
  
  By berndtmj, October 22, 2022
  - 6 comments
  - 982 views
  - Comment by berndtmj
  - September 5
- GSA tige 20v
  
  Year: 2006 Brand: Tige Model / Trim: 20v Device Type : Tab Style Surf Device Material: Stainless Steel Control: Powered with Automated Controller Cost: $3500+ Installation Shop: Self Platform Type: Fiberglass
  
  By Toconnor20v, October 22, 2022
  - 1 comment
  - 6,095 views
  - Comment by RUSSTIGE
  - August 3
- New Transom Walkthrough
  
  Year: 2007 Brand: Calabria Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By Jason6368, July 12, 2022
  - 1 comment
  - 720 views
  - Comment by Jason6368
  - July 12, 2022
- Completed Semi-automated Surf Gates
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered with Automated Controller Cost: $1000-$1499 Platform Type: Fiberglass
  
  By bcjohnsontx, July 11, 2022
  - 6 comments
  - 1,024 views
  - Comment by bcjohnsontx
  - July 18, 2022
- 2006 Malibu 247 Trailer upgrade
  
  Year: 2006 Brand: Malibu Model / Trim: LSV 247 Cost: $2000-$3499
  
  By TimbrSS, July 10, 2022
  - 4 comments
  - 596 views
  - Comment by ike
  - August 9, 2022
- Popup Sundeck Seats
  
  Year: 2000 Brand: Tige Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By AllFAB, June 30, 2022
  - 4 comments
  - 968 views
  - Comment by AllFAB
  - July 18, 2022
- HRD Demo Boat Stereo
  
  Year: 2022 Brand: MB Sports Model / Trim: B52 Alpha Cost: $3500+ DIY or Professional Install: I installed it / created it Installation Shop: HyperRyd Designs Sound Project Components: Upgraded Head Unit, Upgraded Amps, Upgraded Cabin Speakers, Upgraded Tower Speakers, Upgraded Batteries, Upgraded Subwoofer / Box
  
  By Hyperryd, June 12, 2022
  - 5 comments
  - 1,001 views
  - Comment by Hyperryd
  - July 31, 2022
- Tige 2100v flooring upgrade to off-brand machine-cut Seadek
  
  Year: 2001 Brand: Tige Model / Trim: 2100v Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By Albert Withers, June 8, 2022
  - 15 comments
  - 1,547 views
  - Comment by T13MB
  - September 1
- Upgrading from 6.5 to 8's in seat base
  
  Year: 2002 Brand: Malibu Model / Trim: 21 VLX Cost: $0-$249 DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Cabin Speakers
  
  By cowwboy, June 3, 2022
  - 4 comments
  - 653 views
  - Comment by cowwboy
  - June 6, 2022
- Dusty's 2020 Supreme Upgrades
  
  Year: 2020 Brand: Supreme Model / Trim: S238 Cost: (unspecified) DIY or Professional Install: Professional Install / paid for it Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Amps, Upgraded Tower Speakers, Upgraded Wiring, Fuse, etc., Upgraded Subwoofer / Box, Other
  
  By Wylie_Tunes, May 4, 2022
  - 0 comments
  - 696 views
  - Added by Wylie_Tunes
  - May 4, 2022
- B52 Woofer and Media Upgrade
  
  Year: 2013 Brand: MB Sports Model / Trim: B52 Cost: (unspecified) DIY or Professional Install: Professional Install / paid for it Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Head Unit, Upgraded Amps, Upgraded Subwoofer / Box
  
  By Wylie_Tunes, May 2, 2022
  - 1 comment
  - 711 views
  - Comment by NormanMB52
  - May 13, 2022
- Surf Gates Factory Style 07 Wakesetter
  
  Year: 2007 Brand: Malibu Model / Trim: Wakesetter VTX Device Type : Hinged Gate Style Surf Device Material: (unspecified) Control: Powered with Automated Controller Cost: $1500-$1999 Platform Type: Fiberglass https://youtu.be/l2AZkva-2zk
  
  By Jake Maki, April 23, 2022
  - 1 comment
  - 1,086 views
  - Comment by Chadtige03
  - April 27, 2022
- Ballast Upgrade 2800lbs - 2008 Tige RZ2
  
  Year: 2008 Brand: Tige Model / Trim: RZ2 Cost: $1000-$1499 Ballast Modifications: Fat sac(s) DIY or Professional Install: I installed it / created it
  
  By kdammen, April 14, 2022
  - 2 comments
  - 1,340 views
  - Comment by berndtmj
  - April 14, 2022
- 2008 Tige RZ2 EVA Flooring Install
  
  Year: 2008 Brand: Tige Model / Trim: RZ2 Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By kdammen, April 14, 2022
  - 4 comments
  - 1,007 views
  - Comment by Rugger
  - April 19, 2022
- Tige Reshaped Swim Platform
  
  Year: 2008 Brand: Tige Model / Trim: RZ2 Cost: $0-$249 Platform Type: Fiberglass
  
  By kdammen, March 23, 2022
  - 1 comment
  - 1,159 views
  - Comment by Rugger
  - April 14, 2022
- Adding a step to my I-beam trailer
  
  Year: 2002 Brand: Other (include in description) Cost: $250-$499
  
  By cowwboy, March 10, 2022
  - 0 comments
  - 896 views
  - Added by cowwboy
  - March 10, 2022
- Moomba / Supra bildge vent cover - 3D printed
  
  Year: 2008 Brand: Moomba Model / Trim: Outback V Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Other Engine Type: Indmar Assault 325 Material used: Other Project Title : Moomba / Supra bildge vent cover - 3D printed
  
  By Luc St-Pierre, February 23, 2022
  - 1 comment
  - 1,082 views
  - Comment by CUCV
  - February 23, 2022
- Anyone do this before? Make a A22 in half to fix the stringer structure
  
  Year: 2015 Brand: Axis Model / Trim: A22 Cost: (unspecified) DIY or Professional Install: (unspecified) Installation Shop: DIY Engine Type: Monsoon
  
  By Erik, January 9, 2022
  - 2 comments
  - 1,314 views
  - Comment by Rugger
  - January 30, 2022
- There’s a huge hole in my boat!
  
  Year: 2001 Brand: Malibu Model / Trim: LSV Cost: $3500+ DIY or Professional Install: I installed it / created it Engine Type: 325 indmar Monsoon
  
  By TotaledLSV, December 12, 2021
  - 9 comments
  - 1,609 views
  - Comment by jtryon
  - January 11, 2022
- 08 Malibu Surf Gates Retrofit
  
  Year: 2008 Brand: Malibu Model / Trim: VTX Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered with Automated Controller Cost: $2000-$3499 Platform Type: Fiberglass
  
  By dcwilson, December 9, 2021
  - 11 comments
  - 6,780 views
  - Comment by Russell
  - January 28, 2022
- 2004 Centurion Lightning GatorStep
  
  Year: 2004 Brand: Centurion Model / Trim: Lightning Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By Kerplunk318, December 9, 2021
  - 1 comment
  - 1,169 views
  - Comment by Rugger
  - January 5, 2022
- Complete shade bimini
  
  Year: 2012 Brand: MB Sports Model / Trim: F21 Tomcat Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By debenton, November 8, 2021
  - 7 comments
  - 1,327 views
  - Comment by Macdaddy
  - June 21, 2022
- Custom Surf Ballast
  
  Year: 2004 Brand: Tige Model / Trim: 22V Cost: (unspecified) Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: Professional Install / paid for it Installation Shop: Mikes Liquid Audio
  
  By Wylie_Tunes, October 28, 2021
  - 4 comments
  - 1,179 views
  - Comment by Wylie_Tunes
  - November 23, 2021
- Tige R20 Audio
  
  Year: 2017 Brand: Tige Model / Trim: R20 Cost: (unspecified) DIY or Professional Install: Professional Install / paid for it Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Head Unit, Upgraded Amps, Upgraded Tower Speakers, Upgraded Wiring, Fuse, etc., Upgraded Subwoofer / Box
  
  By Wylie_Tunes, October 28, 2021
  - 3 comments
  - 910 views
  - Comment by Wylie_Tunes
  - May 18, 2022
- Axle Upgrade
  
  Year: 2001 Brand: Moomba Model / Trim: Mobius Cost: $250-$499 Installation Shop: Myself
  
  By tylerstrop, September 17, 2021
  - 0 comments
  - 637 views
  - Added by tylerstrop
  - September 17, 2021
- Surf Tabs AND Gates
  
  Year: 2005 Brand: Tige Model / Trim: 22v Device Type : Hinged Gate Style, Tab Style Surf Device Material: Stainless Steel Control: Powered with Automated Controller Cost: $1500-$1999 Platform Type: Teak
  
  By CUCV, September 2, 2021
  - 28 comments
  - 39,157 views
  - Comment by Tigejosh
  - June 3, 2022
- Replacement Supra swim platform brackets
  
  Year: 2006 Brand: Supra Model / Trim: Launch 20 SSV Cost: $0-$249 Platform Type: Fiberglass
  
  By Bliving44, August 31, 2021
  - 1 comment
  - 1,895 views
  - Comment by Rugger
  - September 7, 2021
- Shady Boat Life (cove cover)
  
  Year: 2000 Brand: Tige Model / Trim: riders Device Type : Suction Cup Gate Style Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Fat sac(s) DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Teak Engine Type: merc Material used: Other Project Title : Shady Boat life
  
  By AllFAB, August 20, 2021
  - 6 comments
  - 1,129 views
  - Comment by AllFAB
  - June 21, 2022
- Tower Swivel Rack
  
  Year: 2011 Brand: Axis Model / Trim: A20 Cost: $250-$499 DIY or Professional Install: I installed it / created it Installation Shop: AlphaBoatGear.com
  
  By ryguy1188, August 12, 2021
  - 11 comments
  - 13,882 views
  - Comment by Loosr22
  - September 13, 2022
- Gel Coat Bubble/Scratch/defect repair
  
  Year: 2020 Brand: Supra Model / Trim: SA400 Device Type : Tab Style Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Fiberglass Engine Type: 400 Raptor Material used: Fiberglass Project Title : Gel Coat Bubble/Scratch/defect repair
  
  By SONICJK, July 30, 2021
  - 6 comments
  - 1,198 views
  - Comment by ryan1776
  - March 11, 2022
- Talulah High Flow Ballast Pump install
  
  Year: 2005 Brand: Tige Model / Trim: 22v Cost: $250-$499 Ballast Modifications: Pump(s) DIY or Professional Install: I installed it / created it
  
  By CUCV, July 28, 2021
  - 7 comments
  - 1,163 views
  - Comment by CUCV
  - August 12, 2021
- Indmar Sea Strainer Pro with Flush Connector Installation
  
  Year: 2005 Brand: Tige Model / Trim: 22v Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: (unspecified) Ballast Modifications: Other DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Indmar Sound Project Components: Other Platform Type: Other Engine Type: 5.7 Material used: Other Project Title : Indmar Sea Strainer Pro with Flush Connector Installation
  
  By CUCV, July 16, 2021
  - 0 comments
  - 1,173 views
  - Added by CUCV
  - July 16, 2021
- Lead Alternative
  
  Year: 1998 Brand: Centurion Cost: (unspecified) Ballast Modifications: Other DIY or Professional Install: I installed it / created it
  
  By berndtmj, July 14, 2021
  - 7 comments
  - 980 views
  - Comment by SONICJK
  - July 16, 2021
- Easy - Low Cost Bimini
  
  Year: 1998 Brand: Centurion Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By berndtmj, July 13, 2021
  - 3 comments
  - 1,313 views
  - Comment by berndtmj
  - July 26, 2021
- Updated platform
  
  Year: 2007 Brand: Malibu Model / Trim: 247 LSV Cost: (unspecified) Platform Type: Fiberglass
  
  By Macdaddy, July 7, 2021
  - 7 comments
  - 1,526 views
  - Comment by Jeffdunnville
  - February 21, 2022
- Ski pole table
  
  Year: 2001 Brand: Moomba Model / Trim: Mobius LS Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: (unspecified) Ballast Modifications: Fat sac(s) DIY or Professional Install: I installed it / created it Installation Shop: ME Sound Project Components: Other Platform Type: Other Engine Type: EFI 350 Material used: Fiberglass Project Title : Boat Table
  
  By tylerstrop, June 17, 2021
  - 6 comments
  - 1,148 views
  - Comment by Rugger
  - June 25, 2021
- Improving Towing Visability
  
  Year: 2019 Brand: Malibu Model / Trim: 20 VTX Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By Y-Naut-Ski, June 8, 2021
  - 3 comments
  - 841 views
  - Comment by tylerstrop
  - June 25, 2021
- Malibu seat riser
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Cost: $0-$249 DIY or Professional Install: (unspecified) Installation Shop: Myself
  
  By JDKnowles, June 4, 2021
  - 1 comment
  - 1,857 views
  - Comment by SurfinSnipes
  - June 14, 2021
- Another Rope Storage/Organization
  
  Year: 1998 Brand: Centurion Model / Trim: Elite Bowrider Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Teak Engine Type: Mercruiser 5.7 Material used: Other Project Title : Rope Storage
  
  By berndtmj, May 26, 2021
  - 1 comment
  - 1,052 views
  - Comment by Rugger
  - June 1, 2021
- V Bunk Modification
  
  Year: 2005 Brand: Mastercraft Model / Trim: X-10 Cost: $0-$249 Installation Shop: Self
  
  By Oldyella66, May 23, 2021
  - 1 comment
  - 806 views
  - Comment by Rugger
  - May 25, 2021
- Eva floor again
  
  Year: 2008 Brand: Supra Model / Trim: Launch 22ssv Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By TFreeman, May 22, 2021
  - 4 comments
  - 910 views
  - Comment by TFreeman
  - May 23, 2021
- Surf platform for me/ ladder for the wife
  
  Year: 2008 Brand: Supra Model / Trim: Launch 22ssv Cost: $250-$499 Platform Type: Fiberglass, Other
  
  By TFreeman, May 21, 2021
  - 8 comments
  - 1,325 views
  - Comment by TFreeman
  - June 9, 2021
- Custom Bow Ladder
  
  Year: 2020 Brand: Supra Model / Trim: SA400 Cost: $0-$249
  
  By SONICJK, May 20, 2021
  - 6 comments
  - 943 views
  - Comment by SONICJK
  - May 23, 2021
- FAE install
  
  Year: 2002 Brand: Malibu Model / Trim: 21 VLX Cost: $500-$999 DIY or Professional Install: I installed it / created it Platform Type: Teak Engine Type: Indmar Monsoon (350 SBC)
  
  By cowwboy, May 12, 2021
  - 9 comments
  - 1,054 views
  - Comment by cowwboy
  - May 27, 2021
- Another muffler delete.
  
  Year: 2002 Brand: Malibu Model / Trim: 21 VLX Cost: $0-$249 DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Vibrant Platform Type: Teak Engine Type: Indmar Monsoon (350 SBC)
  
  By cowwboy, May 12, 2021
  - 14 comments
  - 1,924 views
  - Comment by cowwboy
  - May 16, 2022
- Did some wrapping !
  
  Year: 2001 Brand: Moomba Model / Trim: Mobius Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By tylerstrop, May 3, 2021
  - 6 comments
  - 1,174 views
  - Comment by tylerstrop
  - May 13, 2021
- Teak refurb
  
  Year: 2015 Brand: Mastercraft Model / Trim: NXT Cost: $0-$249 Installation Shop: In house Platform Type: Teak
  
  By freeheel4life, April 29, 2021
  - 6 comments
  - 853 views
  - Comment by SONICJK
  - May 5, 2021
- 2001 Tige 2100V Deckadence Style Flooring
  
  Year: 2001 Brand: Tige Model / Trim: 2100V Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By chopper515, April 27, 2021
  - 6 comments
  - 2,258 views
  - Comment by chopper515
  - May 26, 2021
- Adjustable Wake Plate
  
  Year: 1998 Brand: Centurion Model / Trim: Elite Bowrider Device Type : Tab Style Surf Device Material: Stainless Steel Control: Powered via Switches (no controller) Cost: $250-$499 Platform Type: Teak
  
  By berndtmj, April 26, 2021
  - 8 comments
  - 7,852 views
  - Comment by berndtmj
  - April 30, 2021
- Arduino Custom Digital Gauge Panel
  
  Year: 2007 Brand: Malibu Model / Trim: RLXi Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By Scutty, April 25, 2021
  - 23 comments
  - 5,122 views
  - Comment by Scutty
  - June 3
- 2002 Malibu total refurbish.
  
  Year: 2002 Brand: Malibu Model / Trim: XTI Cost: $3500+ DIY or Professional Install: I installed it / created it
  
  By ROFF, April 19, 2021
  - 3 comments
  - 1,443 views
  - Comment by ROFF
  - April 21, 2021
- Tigé slappers
  
  Year: 2003 Brand: Tige Model / Trim: 22v limited Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered via Switches (no controller) Cost: $500-$999 Installation Shop: My shop Platform Type: Teak
  
  By Chadtige03, April 15, 2021
  - 9 comments
  - 3,025 views
  - Comment by Chadtige03
  - March 12, 2022
- Board Storage
  
  Year: (unspecified) Brand: (unspecified) Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By berndtmj, March 29, 2021
  - 1 comment
  - 807 views
  - Comment by Rugger
  - March 29, 2021
- Custom HDPE surf platform
  
  Year: 2008 Brand: Moomba Model / Trim: Outback V Cost: $250-$499 Platform Type: Other
  
  By Luc St-Pierre, March 20, 2021
  - 3 comments
  - 1,216 views
  - Comment by CUCV
  - April 6, 2021
- 06 Malibu 23 LSV Freshen Up
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Cost: $250-$499 Installation Shop: DIY
  
  By JDKnowles, March 17, 2021
  - 1 comment
  - 872 views
  - Comment by Timr71
  - March 17, 2021
- Tige’ E2 Tower side light pipes
  
  Year: 2017 Brand: Tige Model / Trim: R21 Cost: $0-$249 DIY or Professional Install: I installed it / created it Installation Shop: Me
  
  By Bobby, February 20, 2021
  - 4 comments
  - 806 views
  - Comment by HammerTime
  - September 3, 2022
- Morse throttle, maintain and service after 800h
  
  Year: 2003 Brand: Malibu Model / Trim: Sunsetter LXI Device Type : Other Surf Device Material: Other Control: Manual or Fixed (No Actuators) Cost: $0-$249 Ballast Modifications: Fat sac(s), Pump(s), Switches, Relays, Wiring DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Head Unit, Upgraded Amps Platform Type: Teak Engine Type: Mercruiser MPI 350 MAG Towsport Material used: Other
  
  By Nolle, February 17, 2021
  - 1 comment
  - 889 views
  - Comment by GSXRcrasher
  - March 6, 2021
- Exhaust room
  
  Year: 2003 Brand: Malibu Model / Trim: Sunsetter LXI Device Type : Other Surf Device Material: (unspecified) Control: Manual or Fixed (No Actuators) Cost: $0-$249 Ballast Modifications: Fat sac(s) DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Head Unit Platform Type: Teak Engine Type: Mercruiser MPI 350 MAG Towsport Material used: Fiberglass
  
  By Nolle, February 3, 2021
  - 0 comments
  - 700 views
  - Added by Nolle
  - February 3, 2021
- Illusion X Bimini install | 2004 Malibu VLX
  
  Year: 2004 Brand: Malibu Model / Trim: VLX Cost: $500-$999 DIY or Professional Install: (unspecified)
  
  By Noodle0027, February 1, 2021
  - 0 comments
  - 1,342 views
  - Added by Noodle0027
  - February 1, 2021
- Rope organization / hangers
  
  Year: 2004 Brand: Malibu Model / Trim: VLX Device Type : Other Surf Device Material: Other Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Stainless hangers Sound Project Components: Other Platform Type: Teak Engine Type: Monsoon 340 Material used: Other
  
  By Noodle0027, January 30, 2021
  - 4 comments
  - 1,393 views
  - Comment by jtryon
  - May 27, 2021
- Kids wake surf build
  
  Cost: $0-$249 DIY or Professional Install: I installed it / created it Material used: Fiberglass
  
  By Waspjr, January 25, 2021
  - 0 comments
  - 851 views
  - Added by Waspjr
  - January 25, 2021
- Moomba Outback
  
  Year: 2000 Brand: Moomba Model / Trim: Outback Cost: (unspecified) DIY or Professional Install: Professional Install / paid for it Sound Project Components: Upgraded Head Unit, Upgraded Amps, Upgraded Cabin Speakers, Upgraded Tower Speakers, Upgraded Wiring, Fuse, etc., Upgraded Batteries, Upgraded Subwoofer / Box
  
  By Wylie_Tunes, January 19, 2021
  - 3 comments
  - 739 views
  - Comment by Wylie_Tunes
  - January 25, 2021
- Custom Tower Side Pulls for Supra FxOne tower
  
  Year: 2020 Brand: Supra Model / Trim: SA400 Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By SONICJK, January 11, 2021
  - 4 comments
  - 965 views
  - Comment by dalt1
  - January 22
- Carbon fiber swim deck on 24v
  
  Year: 2005 Brand: Tige Model / Trim: 24v Cost: $250-$499 Installation Shop: Homemade Platform Type: Fiberglass
  
  By Monroe1, January 10, 2021
  - 7 comments
  - 1,168 views
  - Comment by Rugger
  - January 16, 2021
- 2001 Tigé 2100V EVA floor install
  
  Year: 2001 Brand: Tige Model / Trim: 2100V Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By conwaylale, December 30, 2020
  - 13 comments
  - 6,993 views
  - Comment by Albert Withers
  - June 10, 2022
- My first board. More to come
  
  Cost: $0-$249 DIY or Professional Install: I installed it / created it Material used: (unspecified)
  
  By Antoine, December 1, 2020
  - 10 comments
  - 1,532 views
  - Comment by Armandaleg
  - January 31, 2021
- Update audio
  
  Year: 2006 Brand: Malibu Model / Trim: LSV247 Cost: $500-$999 DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Head Unit, Upgraded Amps, Upgraded Cabin Speakers, Upgraded Tower Speakers, Upgraded Wiring, Fuse, etc., Upgraded Batteries, Upgraded Subwoofer / Box
  
  By Toddington111, November 30, 2020
  - 0 comments
  - 1,026 views
  - Added by Toddington111
  - November 30, 2020
- Reworked tower the fit.
  
  Year: 2006 Brand: Malibu Model / Trim: LSV247 Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By Toddington111, November 30, 2020
  - 12 comments
  - 1,318 views
  - Comment by Toddington111
  - June 2, 2021
- DIY 10" tower speakers
  
  Year: 2006 Brand: Malibu Model / Trim: LSV 247 Cost: $0-$249 DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Tower Speakers
  
  By Toddington111, November 30, 2020
  - 4 comments
  - 1,279 views
  - Comment by Armandaleg
  - January 31, 2021
- DIY Bimini top
  
  Year: 2006 Brand: Malibu Model / Trim: LSV247 Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By Toddington111, November 30, 2020
  - 5 comments
  - 1,712 views
  - Comment by Toddington111
  - January 4, 2021
- Surf Board Rack
  
  Cost: $0-$249 DIY or Professional Install: I installed it / created it Material used: Other
  
  By SONICJK, November 18, 2020
  - 2 comments
  - 991 views
  - Comment by SONICJK
  - November 18, 2020
- Spaghetti Mat Flooring
  
  Year: 2005 Brand: Mastercraft Model / Trim: X-10 Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By Oldyella66, November 14, 2020
  - 11 comments
  - 1,968 views
  - Comment by Oldyella66
  - May 9, 2021
- Tige Flooring and Sound Refresh
  
  Year: 2007 Brand: Tige Model / Trim: 20v Cost: $3500+ DIY or Professional Install: I installed it / created it
  
  By MillerTime, November 12, 2020
  - 21 comments
  - 8,295 views
  - Comment by shawntom38
  - February 3
- Replace Ballast Pump Impellers
  
  Year: 2005 Brand: Mastercraft Model / Trim: X10 Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Pump(s) DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Other Engine Type: MCX Material used: (unspecified)
  
  By Oldyella66, October 29, 2020
  - 1 comment
  - 26,057 views
  - Comment by Wylie_Tunes
  - October 29, 2020
- Muffler delete.
  
  Year: 2008 Brand: Supra Model / Trim: Launch 22ssv Cost: $0-$249 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Cat 340
  
  By TFreeman, October 25, 2020
  - 5 comments
  - 1,155 views
  - Comment by TFreeman
  - April 29, 2021
- Replace Leaking Dripless Seal
  
  Year: 2005 Brand: Mastercraft Model / Trim: X10 Cost: $0-$249 Engine Type: Indmar MCX
  
  By Oldyella66, October 15, 2020
  - 4 comments
  - 25,849 views
  - Comment by shacked57
  - April 15
- Piggyback Ballast for '12 Mastercraft
  
  Year: 2012 Brand: Mastercraft Model / Trim: X30 Cost: $1000-$1499 Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Relays, Wiring, Fittings DIY or Professional Install: I installed it / created it
  
  By dh009, October 14, 2020
  - 9 comments
  - 2,225 views
  - Comment by dh009
  - October 24, 2020
- Electric over Hydraulic Brake Conversion
  
  Year: 2005 Brand: Mastercraft Model / Trim: X-10 Cost: $500-$999
  
  By Oldyella66, October 10, 2020
  - 3 comments
  - 3,162 views
  - Comment by dalt1
  - January 23
- Centurion Sideswipe conversion
  
  Year: 2007 Brand: Centurion Model / Trim: Typhoon Cost: $250-$499 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: 5.7L Black Scorpion
  
  By jtryon, October 8, 2020
  - 7 comments
  - 8,523 views
  - Comment by jtryon
  - October 13, 2020
- Go Surf Assist (GSA) Install
  
  Year: 2013 Brand: Axis Model / Trim: A22 Device Type : Tab Style Surf Device Material: Stainless Steel Control: Powered with Automated Controller Cost: $3500+ Installation Shop: Self Platform Type: Fiberglass
  
  By GloverT, October 8, 2020
  - 5 comments
  - 3,301 views
  - Comment by T.Meyer
  - March 2
- Something Simple
  
  Year: 2004 Brand: Malibu Model / Trim: 23 LSV Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Teak Engine Type: 340 Monsoon Material used: Wood
  
  By JWALL, October 8, 2020
  - 2 comments
  - 1,251 views
  - Comment by JWALL
  - November 1, 2020
- Steering Cable Replacement
  
  Year: 1998 Brand: Centurion Model / Trim: Elite Bowrider Device Type : Suction Cup Gate Style Surf Device Material: Other Control: Manual or Fixed (No Actuators) Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Teleflex Sound Project Components: Other Platform Type: Teak Engine Type: Mercruiser 5.7 Material used: Other
  
  By berndtmj, October 6, 2020
  - 4 comments
  - 861 views
  - Comment by k9feldr
  - July 19, 2022
- Rebuilding Trailer Guides
  
  Year: 2005 Brand: Mastercraft Model / Trim: X10 Cost: $0-$249
  
  By Oldyella66, September 30, 2020
  - 1 comment
  - 940 views
  - Comment by ZorbaMalibu
  - February 2, 2021
- New brakes and rebuild for boat trailer
  
  Year: 2005 Brand: Mastercraft Model / Trim: X10 Cost: $500-$999
  
  By Oldyella66, September 30, 2020
  - 5 comments
  - 909 views
  - Comment by Oldyella66
  - October 17, 2020
- Larger board racks/forks/tines
  
  Year: 2016 Brand: Malibu Model / Trim: 22 MXZ Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By John Travland, September 25, 2020
  - 6 comments
  - 1,300 views
  - Comment by John Travland
  - October 14, 2020
- Maradyne Heater Install on 2020 SA
  
  Year: 2020 Brand: Supra Model / Trim: SA400 Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By SONICJK, September 21, 2020
  - 14 comments
  - 2,044 views
  - Comment by SONICJK
  - October 22, 2021
- 2001 Tige 23V Total Rebuild
  
  Year: 2001 Brand: Tige Model / Trim: 23v Cost: (unspecified) DIY or Professional Install: I installed it / created it
  
  By SONICJK, September 20, 2020
  - 8 comments
  - 17,018 views
  - Comment by SONICJK
  - August 16, 2021
- Exhaust woes
  
  Year: 2008 Brand: Supra Model / Trim: Sunsport 22V Cost: (unspecified) DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Indmar Assault
  
  By Creekrat, September 17, 2020
  - 0 comments
  - 920 views
  - Added by Creekrat
  - September 17, 2020
- HomeMade Surf Pipe
  
  Year: 2001 Brand: Moomba Cost: $0-$249 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Indmar EFI
  
  By tylerstrop, September 11, 2020
  - 11 comments
  - 4,048 views
  - Comment by CALIV210
  - June 1, 2021
- Adding Bags
  
  Year: 2004 Brand: Malibu Model / Trim: 23 LSV Cost: $500-$999 Ballast Modifications: Fat sac(s) DIY or Professional Install: I installed it / created it
  
  By JWALL, August 14, 2020
  - 1 comment
  - 1,033 views
  - Comment by conwaylale
  - August 17, 2020
- Interior complete redo
  
  Year: 2001 Brand: Moomba Model / Trim: Mobius Cost: $500-$999 DIY or Professional Install: I installed it / created it
  
  By tylerstrop, August 11, 2020
  - 4 comments
  - 2,158 views
  - Comment by tylerstrop
  - September 11, 2020
- Amp board and subs installed
  
  Year: 2005 Brand: Supra Model / Trim: 24 Launch SSV Cost: (unspecified) DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Subwoofer / Box, Other
  
  By BADS24SSV, August 11, 2020
  - 0 comments
  - 1,032 views
  - Added by BADS24SSV
  - August 11, 2020
- '07 Malibu rLxi Interior Face Lift
  
  Year: 2007 Brand: Malibu Model / Trim: Response rLxi Cost: $1500-$1999 DIY or Professional Install: I installed it / created it
  
  By Scutty, August 5, 2020
  - 5 comments
  - 1,621 views
  - Comment by Scutty
  - September 11, 2020
- Walkway Storage (Removable)
  
  Year: 2014 Brand: Moomba Model / Trim: Mobius LSV Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By no_hurry, July 16, 2020
  - 3 comments
  - 1,324 views
  - Comment by Timr71
  - July 31, 2020
- Ice melter (factory cooler) fix
  
  Year: 2008 Brand: Supra Model / Trim: Launch 22ssv Device Type : Suction Cup Gate Style Surf Device Material: (unspecified) Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Sound Project Components: Other Platform Type: Fiberglass Engine Type: Indmar 340 Material used: Other
  
  By TFreeman, July 13, 2020
  - 3 comments
  - 1,368 views
  - Comment by TFreeman
  - July 16, 2020
- Surf Gates on 2000 Mastercraft X-Star
  
  Year: 2000 Brand: Mastercraft Model / Trim: X-Star Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered with Automated Controller Cost: $1500-$1999 Installation Shop: DIY Platform Type: Teak
  
  By Panabax, July 7, 2020
  - 7 comments
  - 9,922 views
  - Comment by Panabax
  - September 7, 2020
- 22ssv reconfiguration
  
  Year: Choose Below Brand: Supra Model / Trim: Launch 22ssv Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By TFreeman, July 4, 2020
  - 8 comments
  - 1,484 views
  - Comment by TFreeman
  - July 25, 2022
- Internal cup holder rings
  
  Year: 2007 Brand: Malibu Model / Trim: Lsv Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By Shadetreefab, June 18, 2020
  - 9 comments
  - 1,877 views
  - Comment by Shadetreefab
  - June 30, 2020
- Another small project
  
  Year: 2003 Brand: Malibu Model / Trim: 23 LSV Device Type : Other Surf Device Material: Other Control: Unspecified Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Custum Dynamics Sound Project Components: Other Platform Type: Teak Engine Type: 340 Monsoon Material used: Other
  
  By JWALL, June 18, 2020
  - 5 comments
  - 1,233 views
  - Comment by JWALL
  - July 21, 2020
- Custom Slalom Ski Rack
  
  Year: Choose Below Brand: Malibu Model / Trim: 22 LVX Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By crumplez, June 17, 2020
  - 6 comments
  - 7,154 views
  - Comment by crumplez
  - May 6, 2021
- Illusion Tower Swivel Racks
  
  Year: 2004 Brand: Choose Below Model / Trim: 23 LSV Device Type : Other Surf Device Material: (unspecified) Control: Unspecified Cost: $500-$999 Ballast Modifications: Other DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Krypt Watersports Sound Project Components: Other Platform Type: Teak Engine Type: 340 Monsoon Material used: Other
  
  By JWALL, June 11, 2020
  - 8 comments
  - 1,975 views
  - Comment by SONICJK
  - June 25, 2020
- Upgrade to 18-inch wheels and wider fenders for Boatmate trailers
  
  Year: Choose Below Brand: Malibu Model / Trim: VLX Cost: $2000-$3499 Installation Shop: I did it https://www.youtube.com/watch?v=20P05z3jSn0&t=496s
  
  By Billy Simkins, June 3, 2020
  - 5 comments
  - 2,765 views
  - Comment by Nitrousbird
  - September 16, 2020
- New Swell Suction Gate on 2008 VLX
  
  Year: Choose Below Brand: Malibu Model / Trim: VLX Device Type : Suction Cup Gate Style Surf Device Material: N/A Purchased System Control: Manual or Fixed (No Actuators) Cost: $250-$499 Installation Shop: DIY Platform Type: Fiberglass https://www.youtube.com/watch?v=40d48q5IVgU
  
  By Billy Simkins, June 3, 2020
  - 3 comments
  - 1,924 views
  - Comment by JWALL
  - September 14, 2020
- ADDED A WETSOUND SYSTEM WITH 4 REV 10S TO A 2008 VLX
  
  Year: 2008 Brand: Malibu Model / Trim: VLX Cost: $3500+ DIY or Professional Install: I installed it / created it Installation Shop: We did it Sound Project Components: Upgraded Amps, Upgraded Cabin Speakers, Upgraded Tower Speakers, Upgraded Subwoofer / Box https://www.youtube.com/watch?v=E0VcgC2eUAU
  
  By Billy Simkins, May 26, 2020
  - 3 comments
  - 1,732 views
  - Comment by Billy Simkins
  - June 3, 2020
- Slalom Ski Rack - compatible with standard wakeboard / surf board tower racks
  
  Year: Choose Below Brand: Centurion Model / Trim: Falcon Open Bow Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By Timr71, May 19, 2020
  - 7 comments
  - 1,975 views
  - Comment by Timr71
  - June 8, 2020
- Battery Relocation Under Seat
  
  Year: 2005 Brand: Supra Model / Trim: 24 Launch SSV Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By BADS24SSV, April 27, 2020
  - 1 comment
  - 5,780 views
  - Comment by Rugger
  - April 27, 2020
- Mahogany Swim Deck
  
  Year: 2002 Brand: Tige Model / Trim: 23V Cost: $0-$249 Installation Shop: Me Platform Type: Teak, Other
  
  By SONICJK, April 23, 2020
  - 5 comments
  - 3,672 views
  - Comment by berndtmj
  - August 27, 2020
- Gen2 to Gen3 Fuel Pump Replacement
  
  Year: 2008 Brand: Malibu Model / Trim: 247 LSV Cost: $500-$999 Engine Type: 383 Hammerhead
  
  By jonthefireman, April 21, 2020
  - 3 comments
  - 14,633 views
  - Comment by Wessel
  - October 3, 2020
- In-dash GPS / Fish / Depth-finder
  
  Year: 1993 Brand: Centurion Model / Trim: Falcon Open Bow Cost: $250-$499 DIY or Professional Install: I installed it / created it
  
  By Timr71, April 17, 2020
  - 1 comment
  - 1,645 views
  - Comment by Rugger
  - April 17, 2020
- 2001 Tige 21V new swim platform with custom brackets
  
  Year: 2001 Brand: Tige Model / Trim: 21V riders Cost: $0-$249 Installation Shop: myself Platform Type: Fiberglass
  
  By Nicholas Mahoney, April 15, 2020
  - 2 comments
  - 8,433 views
  - Comment by Nicholas Mahoney
  - April 19, 2020
- Malibu 247 8.1 muffler delete.
  
  Year: 2006 Brand: Malibu Model / Trim: 247 LSV Cost: $250-$499 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Indmar 8.1
  
  By TimbrSS, April 12, 2020
  - 12 comments
  - 13,892 views
  - Comment by TimbrSS
  - May 6, 2020
- Swim platform ladder
  
  Year: 2010 Brand: Malibu Model / Trim: VLX Cost: $0-$249 Platform Type: Fiberglass
  
  By Jhartt3, April 4, 2020
  - 4 comments
  - 3,494 views
  - Comment by Jhartt3
  - April 13, 2020
- Complete Ballast Overhaul - 2006 Moomba XLV
  
  Year: 2006 Brand: Moomba Model / Trim: XLV Cost: (unspecified) Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: I installed it / created it
  
  By Jase, April 4, 2020
  - 13 comments
  - 4,595 views
  - Comment by Wylie_Tunes
  - October 4, 2021
- 4,000 Staples Later #Wake For Life
  
  Year: 2000 Brand: Moomba Model / Trim: Kambrea Cost: $0-$249 DIY or Professional Install: I installed it / created it
  
  By Nathan Brown, March 31, 2020
  - 7 comments
  - 2,128 views
  - Comment by cowwboy
  - April 13, 2020
- Excessive Water in your Bilge? Repack Shaft Seal
  
  Year: 2002 Brand: Malibu Model / Trim: Sunsetter Cost: $0-$249 Installation Shop: DIY Platform Type: Teak https://youtu.be/NkzStf_91fs
  
  By My02Malibu, March 24, 2020
  - 1 comment
  - 25,241 views
  - Comment by Rugger
  - March 25, 2020
- 2009 mobius lsv ballast install
  
  Year: 2009 Brand: Moomba Model / Trim: LSV Cost: $1000-$1499 Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: I installed it / created it https://youtu.be/WicATAQ8FsU
  
  By Livewire, February 29, 2020
  - 4 comments
  - 2,923 views
  - Comment by Livewire
  - June 10, 2020
- Mandrel Bent Exhaust and Muffler Bypass
  
  Year: 2010 Brand: Malibu Model / Trim: VLX Cost: $250-$499 DIY or Professional Install: I installed it / created it Platform Type: Fiberglass Engine Type: Monsoon 350
  
  By Catman, February 23, 2020
  - 19 comments
  - 2,196 views
  - Comment by Catman
  - April 9, 2022
- Intake plenum refinish
  
  Year: 2007 Brand: Malibu Model / Trim: 383 Hammerhead Cost: $0-$249 DIY or Professional Install: I installed it / created it Installation Shop: My sign shop :)
  
  By Callan Laughton, February 13, 2020
  - 3 comments
  - 1,294 views
  - Comment by Rugger
  - February 16, 2020
- Trailer Bunks
  
  Year: 2008 Brand: Malibu Model / Trim: 247 LSV Cost: $250-$499 Installation Shop: My Garage
  
  By jonthefireman, February 5, 2020
  - 7 comments
  - 2,381 views
  - Comment by ducann
  - January 6
- FAE Install w/muffler delete
  
  Year: Choose Below Brand: Malibu Model / Trim: Wakesetter 247 Cost: $500-$999 DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: Fresh Air Exhaust Platform Type: Fiberglass Engine Type: 383 Hammerhead
  
  By jonthefireman, December 11, 2019
  - 7 comments
  - 4,660 views
  - Comment by Marco23
  - April 17, 2021
- Stainless Surf Exhaust
  
  Year: 2001 Brand: Tige Model / Trim: 23V Cost: $0-$249 DIY or Professional Install: I installed it / created it Platform Type: Teak Engine Type: 350
  
  By SONICJK, September 26, 2019
  - 7 comments
  - 2,208 views
  - Comment by 918vlx
  - June 28, 2020
- Rechroming and powdercoating peeling Malibu emblems and bezels
  
  Year: 2007 Brand: Malibu Model / Trim: VLX SE Cost: $250-$499 DIY or Professional Install: Professional Install / paid for it Installation Shop: Industrial Coatings
  
  By WKUwake, September 24, 2019
  - 3 comments
  - 1,607 views
  - Comment by WKUwake
  - September 7, 2022
- Custom under helm subwoofer box
  
  Year: 2007 Brand: Malibu Model / Trim: VLX SE Cost: $0-$249 DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Subwoofer / Box
  
  By WKUwake, September 24, 2019
  - 7 comments
  - 3,922 views
  - Comment by TFreeman
  - March 18, 2021
- Glued in carpet to Gatorstep
  
  Year: 2007 Brand: Malibu Model / Trim: VLX SE Cost: $1500-$1999 DIY or Professional Install: I installed it / created it
  
  By WKUwake, September 24, 2019
  - 10 comments
  - 29,168 views
  - Comment by YeloBlammo
  - November 10, 2022
- Baltic Burch surf
  
  Cost: $0-$249 DIY or Professional Install: I installed it / created it Material used: Wood
  
  By Armandaleg, September 20, 2019
  - 9 comments
  - 1,341 views
  - Comment by Armandaleg
  - January 31, 2021
- Stereo Off Delay when switching from running to Acc
  
  Year: Choose Below Brand: Tige Model / Trim: 23V Cost: $0-$249 DIY or Professional Install: I installed it / created it Sound Project Components: Upgraded Wiring, Fuse, etc.
  
  By SONICJK, September 18, 2019
  - 1 comment
  - 1,265 views
  - Comment by Antoine
  - October 16, 2021
- Walnut Surf Board
  
  Cost: (unspecified) DIY or Professional Install: I installed it / created it Material used: Wood
  
  By SONICJK, September 9, 2019
  - 3 comments
  - 1,098 views
  - Comment by wakeman22
  - April 15, 2020
- Hand made boards
  
  Cost: $0-$249 DIY or Professional Install: I installed it / created it Manufacturer(s) of primary products: God, titebond, dakine Material used: Wood
  
  By Playjay, September 7, 2019
  - 11 comments
  - 1,944 views
  - Comment by Playjay
  - February 14, 2020
- 2011 Wakesetter GatorStep Install
  
  Year: 2011 Brand: Malibu Cost: (unspecified) DIY or Professional Install: I installed it
  
  By joshl, August 28, 2019
  - 2 comments
  - 2,655 views
  - Comment by Hyperryd
  - August 30, 2019
- 3 batteries relocated, custom box and switch access door
  
  Year: 2007 Brand: Malibu Model / Trim: 247 LSV Cost: $500-$999 DIY or Professional Install: I installed it
  
  By Rugger, August 3, 2019
  - 2 comments
  - 1,533 views
  - Comment by Rugger
  - April 2, 2020
- Walmart Fake-A-Lake
  
  Year: 2011 Brand: Malibu Model / Trim: Wakesetter VLX Device Type : Other Surf Device Material: Other Control: Powered with Automated Controller Cost: (unspecified) Ballast Modifications: Other DIY or Professional Install: I installed it Sound Project Components: Other Platform Type: Fiberglass Engine Type: Monsoon 350
  
  By joshl, July 31, 2019
  - 2 comments
  - 1,817 views
  - Comment by Gbracer
  - August 6, 2019
- Trailer guide poles
  
  Year: Choose Below Brand: Malibu Model / Trim: Vlx Cost: $0-$249
  
  By 918vlx, July 28, 2019
  - 0 comments
  - 1,291 views
  - Added by 918vlx
  - July 28, 2019
- Trailer bow guards
  
  Year: 2007 Brand: Nautique / CC Model / Trim: 226 Cost: $0-$249 Installation Shop: self
  
  By Gbracer, July 26, 2019
  - 2 comments
  - 1,427 views
  - Comment by Rugger
  - July 27, 2019
- New flooring (like Deckadence)
  
  Year: 2014 Brand: Moomba Model / Trim: Mondo Cost: $250-$499 DIY or Professional Install: I installed it
  
  By Shoebox, July 23, 2019
  - 2 comments
  - 1,926 views
  - Comment by Leebo
  - August 23, 2019
- Surfgate 2011 Wakesetter esp32
  
  Year: Choose Below Brand: Malibu Model / Trim: Wakesetter Device Type : Hinged Gate Style Surf Device Material: Other Control: Powered with Automated Controller Cost: $500-$999 Platform Type: Fiberglass
  
  By joshl, July 21, 2019
  - 9 comments
  - 3,747 views
  - Comment by YeloBlammo
  - August 9, 2022
- Under seat sub
  
  Year: 2008 Brand: Centurion Model / Trim: Avalanche Cost: $0-$249 DIY or Professional Install: I installed it Sound Project Components: Upgraded Subwoofer / Box
  
  By Armandaleg, July 1, 2019
  - 7 comments
  - 1,707 views
  - Comment by Armandaleg
  - September 12, 2019
- Equalizer install
  
  Year: Choose Below Brand: Moomba Model / Trim: Mobius Cost: $0-$249 DIY or Professional Install: I installed it Sound Project Components: Other
  
  By Antoine, June 30, 2019
  - 2 comments
  - 1,250 views
  - Comment by cowwboy
  - July 3, 2019
- Centurion Enzo Seadek Install
  
  Year: 2007 Brand: Centurion Model / Trim: Enzo SV216 Cost: $500-$999 DIY or Professional Install: I installed it
  
  By wishbone1961, June 17, 2019
  - 2 comments
  - 1,798 views
  - Comment by Kpsmitty
  - May 26, 2020
- New Bimini Cover
  
  Year: 2007 Brand: Mastercraft Model / Trim: X2 Cost: $0-$249 DIY or Professional Install: I installed it
  
  By John E Travland, June 11, 2019
  - 0 comments
  - 1,307 views
  - Added by John E Travland
  - June 11, 2019
- DIY Upholstery and Fiberglass Walkway
  
  Year: 2007 Brand: Mastercraft Model / Trim: X2 Cost: $500-$999 DIY or Professional Install: (unspecified)
  
  By John E Travland, June 11, 2019
  - 4 comments
  - 2,443 views
  - Comment by Married2Maristar
  - June 26, 2021
- 3D Printed Graphics
  
  Year: 2007 Brand: Mastercraft Model / Trim: X2 Cost: $0-$249 DIY or Professional Install: I installed it
  
  By John E Travland, June 11, 2019
  - 8 comments
  - 1,595 views
  - Comment by dcwilson
  - January 12, 2021
- Transom seat backs
  
  Year: Choose Below Brand: Mastercraft Model / Trim: X2 Cost: $250-$499 DIY or Professional Install: I installed it
  
  By John E Travland, June 11, 2019
  - 12 comments
  - 3,738 views
  - Comment by Xstarstar
  - December 13, 2022
- 01 VLX muffler delete
  
  Year: Choose Below Brand: Malibu Model / Trim: VLX Cost: $0-$249 DIY or Professional Install: I installed it Manufacturer(s) of primary products: Summit racing Platform Type: Teak Engine Type: 335 monsoon
  
  By 918vlx, June 6, 2019
  - 6 comments
  - 2,007 views
  - Comment by 918vlx
  - June 17, 2019
- Wet Sound Rev8 tower speaker and amp upgrade
  
  Year: 2014 Brand: Moomba Model / Trim: Mobius LSV Cost: (unspecified) DIY or Professional Install: I installed it Sound Project Components: Upgraded Tower Speakers
  
  By no_hurry, May 30, 2019
  - 4 comments
  - 1,407 views
  - Comment by freeheel4life
  - June 27, 2019
- LARGE bilge pump
  
  Year: 2007 Brand: Malibu Model / Trim: 247 LSV Cost: $0-$249 DIY or Professional Install: I installed it
  
  By Rugger, May 4, 2019
  - 2 comments
  - 1,581 views
  - Comment by Rugger
  - May 4, 2019
- OEM Rockford Woofer in Malibu
  
  Year: 2016 Brand: Malibu Model / Trim: LSV Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Subwoofer / Box
  
  By Wylie_Tunes, April 14, 2019
  - 1 comment
  - 1,168 views
  - Comment by freeheel4life
  - April 28, 2019
- Bow seating and integrated ballast upgrade
  
  Year: 2011 Brand: Malibu Model / Trim: Vride 21 Cost: $500-$999 Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: I installed it
  
  By Bovhica, April 7, 2019
  - 9 comments
  - 2,107 views
  - Comment by Married2Maristar
  - November 14, 2020
- Go Surf Assist install
  
  Year: 2011 Brand: Malibu Model / Trim: Vride21 Device Type : Tab Style Surf Device Material: Aluminum Control: Powered with Automated Controller Cost: $3500+ Installation Shop: Idaho Water Sports Platform Type: Fiberglass
  
  By Bovhica, April 6, 2019
  - 25 comments
  - 8,663 views
  - Comment by Rugger
  - March 24, 2021
- Free a stuck coupler
  
  Year: 2004 Brand: Malibu Cost: $0-$249 Installation Shop: Prestige Water Sports Engine Type: Indmar 5.7
  
  By freeheel4life, March 20, 2019
  - 1 comment
  - 1,136 views
  - Comment by Rugger
  - April 28, 2019
- 2001 SAN Tower & Windshield Frame Powdercoat
  
  Year: 2001 Brand: Nautique / CC Model / Trim: Super Air 210 Cost: $1000-$1499 DIY or Professional Install: I installed it
  
  By Brit_hunsicker, March 18, 2019
  - 4 comments
  - 1,392 views
  - Comment by Brit_hunsicker
  - April 4, 2019
- 2001 SAN Upholstery Replacement
  
  Year: 2001 Brand: Nautique / CC Model / Trim: Super Air 210 Cost: $2000-$3499 DIY or Professional Install: I installed it
  
  By Brit_hunsicker, March 17, 2019
  - 2 comments
  - 1,484 views
  - Comment by freeheel4life
  - March 18, 2019
- Trailer Restoration for 2001 SAN 210
  
  Year: 2001 Brand: Nautique / CC Model / Trim: Super Air 210 Cost: $1000-$1499 Installation Shop: DIY
  
  By Brit_hunsicker, March 15, 2019
  - 3 comments
  - 1,312 views
  - Comment by Brit_hunsicker
  - March 16, 2019
- OG Super Air Nautique SeaDek Templates
  
  Year: 2001 Brand: Nautique / CC Model / Trim: Super Air 210 Cost: $500-$999 DIY or Professional Install: Professional Install Installation Shop: Dek Designs Topeka Kansas
  
  By Brit_hunsicker, March 14, 2019
  - 3 comments
  - 6,397 views
  - Comment by Rugger
  - March 18, 2019
- Qi Wireless Charger
  
  Year: 2017 Brand: Malibu Model / Trim: VLX Cost: $500-$999 DIY or Professional Install: I installed it
  
  By D_Turner, March 9, 2019
  - 6 comments
  - 2,570 views
  - Comment by jtryon
  - May 6, 2020
- Ballast Bag Level Monitoring
  
  Year: 2017 Brand: Malibu Model / Trim: VLX Cost: $500-$999 Ballast Modifications: Fat sac(s), Wiring, Other DIY or Professional Install: I installed it
  
  By D_Turner, February 24, 2019
  - 16 comments
  - 4,613 views
  - Comment by jestes
  - August 9, 2022
- Rebuild UFP-35 Trailer Calipers
  
  Year: 2006 Brand: Other (include in description) Model / Trim: Boatmate Cost: (unspecified)
  
  By Dukeno1, January 29, 2019
  - 3 comments
  - 5,926 views
  - Comment by Rugger
  - July 21, 2021
- DIY Bimini Top for 2002 VLX
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Cost: (unspecified) DIY or Professional Install: I installed it
  
  By tunafoot, November 29, 2018
  - 0 comments
  - 1,694 views
  - Added by tunafoot
  - November 29, 2018
- Fixing Gel Coat Spider Cracks 2002 Malibu VLX
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Cost: $0-$249
  
  By tunafoot, November 29, 2018
  - 1 comment
  - 4,079 views
  - Comment by Rugger
  - April 29, 2019
- Carpet replacement for 2002 Malibu VLX
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Cost: (unspecified) DIY or Professional Install: I installed it
  
  By tunafoot, November 29, 2018
  - 6 comments
  - 8,844 views
  - Comment by tunafoot
  - September 9, 2021
- Interior and Floor update to make 2002 Malibu VLX like new
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Cost: (unspecified) DIY or Professional Install: I installed it
  
  By tunafoot, November 29, 2018
  - 2 comments
  - 4,360 views
  - Comment by tunafoot
  - July 1, 2020
- Bimini Surf Pockets
  
  Year: 2013 Brand: Tige Model / Trim: Z3 Cost: $0-$249 DIY or Professional Install: I installed it
  
  By tunafoot, November 24, 2018
  - 4 comments
  - 23,071 views
  - Comment by wellis77
  - May 20, 2022
- Moomba OEM Woofer Enclosure Install
  
  Year: 2018 Brand: Moomba Model / Trim: Mondo and other Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Subwoofer / Box https://youtu.be/Hru-NB88Nes
  
  By Wylie_Tunes, November 14, 2018
  - 1 comment
  - 3,467 views
  - Comment by Number9
  - April 28, 2019
- 07 Centurion Battery Switch Upgrade
  
  Year: 2007 Brand: Centurion Model / Trim: Avalanche Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio Sound Project Components: Upgraded Batteries, Other
  
  By Wylie_Tunes, September 22, 2018
  - 0 comments
  - 1,435 views
  - Added by Wylie_Tunes
  - September 22, 2018
- 07 Centurion Rear Hard Tanks to Sacs
  
  Year: 2007 Brand: Centurion Model / Trim: Avalanche Cost: (unspecified) Ballast Modifications: Fat sac(s), Hard tank(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio
  
  By Wylie_Tunes, September 22, 2018
  - 1 comment
  - 3,678 views
  - Comment by Dangib
  - April 29, 2019
- Evolution to Monster MTK Tower
  
  Year: 2007 Brand: Centurion Model / Trim: Avalanche Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio
  
  By Wylie_Tunes, September 22, 2018
  - 6 comments
  - 8,354 views
  - Comment by berndtmj
  - September 15, 2022
- HDPE Surf Platfom
  
  Year: 2007 Brand: Moomba Model / Trim: LSV Cost: $250-$499 Platform Type: Other
  
  By Leebo, September 15, 2018
  - 2 comments
  - 8,765 views
  - Comment by Armandaleg
  - September 12, 2019
- DECKadence/Miner's Moss Floor
  
  Year: 2007 Brand: Moomba Model / Trim: LSV Cost: $250-$499 DIY or Professional Install: I installed it
  
  By Leebo, September 9, 2018
  - 6 comments
  - 3,918 views
  - Comment by Leebo
  - April 29, 2019
- Direct drive plumbed in ballast
  
  Year: pre 1985 Brand: Nautique / CC Model / Trim: Ski nautique Cost: (unspecified) Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Fittings DIY or Professional Install: I installed it
  
  By TFreeman, August 17, 2018
  - 5 comments
  - 2,906 views
  - Comment by CALIV210
  - April 29, 2019
- Interior LED rings on the cheap
  
  Year: pre 1985 Brand: Nautique / CC Model / Trim: Ski nautique 20 Cost: $0-$249 DIY or Professional Install: I installed it
  
  By TFreeman, August 17, 2018
  - 4 comments
  - 2,149 views
  - Comment by TFreeman
  - May 4, 2020
- GatorStep flooring upgrade
  
  Year: 2013 Brand: Malibu Model / Trim: 20 VTX Cost: $500-$999 DIY or Professional Install: I installed it
  
  By Jason63, July 19, 2018
  - 3 comments
  - 4,191 views
  - Comment by Kojak
  - April 29, 2019
- Dripless Shaft Seal Upgrade on 2007 LSV
  
  Year: 2007 Brand: Malibu Model / Trim: LSV 247 Cost: $0-$249 Engine Type: 8.1 Vortec/Indmar
  
  By Rugger, July 15, 2018
  - 7 comments
  - 14,888 views
  - Comment by Shadetreefab
  - June 15, 2020
- NSS style device for 210
  
  Year: 2009 Brand: Nautique / CC Model / Trim: 210 Device Type : NSS (slide) Style Surf Device Material: Stainless Steel Control: Powered with Automated Controller Cost: $1500-$1999 Platform Type: Fiberglass
  
  By Max 1.6, July 13, 2018
  - 30 comments
  - 6,972 views
  - Comment by Russell
  - May 3
- Lead bags
  
  Year: 2006 Brand: Choose Below Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it
  
  By Gravity, July 13, 2018
  - 0 comments
  - 1,683 views
  - Added by Gravity
  - July 13, 2018
- Rudder box rebuild
  
  Year: 2007 Brand: Malibu Model / Trim: LSV 247 Cost: $0-$249 DIY or Professional Install: I installed it
  
  By Rugger, July 11, 2018
  - 7 comments
  - 19,762 views
  - Comment by Rugger
  - July 5, 2019
- Ballast Solenoid Upgrade - Distribution
  
  Year: 2007 Brand: Centurion Model / Trim: Lightning C-4 Cost: $0-$249 Ballast Modifications: Other DIY or Professional Install: I installed it
  
  By fjohnp, July 3, 2018
  - 0 comments
  - 3,884 views
  - Added by fjohnp
  - July 3, 2018
- More awesome MB Slappers
  
  Year: Choose Below Brand: MB Sports Model / Trim: B52 Wide Body Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered with Automated Controller Cost: (unspecified) Platform Type: Fiberglass
  
  By Hyperryd, July 2, 2018
  - 13 comments
  - 7,033 views
  - Comment by jtryon
  - April 23, 2020
- Closed cooling on 8.1 in wakesetter 247
  
  Year: 2008 Brand: Malibu Model / Trim: 247 lsv Cost: (unspecified) Engine Type: 8.1
  
  By 2008_247lsv, June 27, 2018
  - 4 comments
  - 2,873 views
  - Comment by Rugger
  - April 29, 2019
- Surfgates - 2002 Malibu 21’ VLX Wakesetter
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Device Type : Hinged Gate Style Surf Device Material: Starboard or a HDPE Control: Powered with Automated Controller Cost: $500-$999 Platform Type: Teak
  
  By tunafoot, June 21, 2018
  - 8 comments
  - 5,508 views
  - Comment by OGsan210
  - October 31, 2020
- Wetsounds MC1 in dash mount
  
  Year: 2002 Brand: Malibu Model / Trim: VLX Cost: $500-$999 DIY or Professional Install: I installed it Sound Project Components: Upgraded Head Unit, Other
  
  By cowwboy, June 16, 2018
  - 17 comments
  - 4,831 views
  - Comment by wellis77
  - November 17, 2021
- Ski nautique to xti interior conversion
  
  Year: pre 1985 Brand: Nautique / CC Model / Trim: Ski name 2001 Cost: $250-$499 DIY or Professional Install: I installed it
  
  By TFreeman, June 12, 2018
  - 8 comments
  - 21,023 views
  - Comment by TFreeman
  - March 18, 2021
- False Wall for Aftermarket Subwoofer Box
  
  Year: Choose Below Brand: Moomba Model / Trim: XLV Cost: $250-$499 DIY or Professional Install: I installed it Sound Project Components: Upgraded Subwoofer / Box
  
  By bsharer, June 6, 2018
  - 11 comments
  - 3,310 views
  - Comment by hot4teach
  - April 28, 2019
- Stealth Surf Pipe (center exit)
  
  Year: 2007 Brand: Malibu Model / Trim: LSV 247 Cost: $500-$999 DIY or Professional Install: I installed it Engine Type: Big Block Indmar/GM 8.1 https://youtu.be/60XqQzwGs4g
  
  By Rugger, June 3, 2018
  - 22 comments
  - 11,306 views
  - Comment by dcwilson
  - December 8, 2021
- Additional Set of Rev10s
  
  Year: 2015 Brand: MB Sports Model / Trim: F22 Tomcat Cost: $1000-$1499 DIY or Professional Install: I installed it Sound Project Components: Upgraded Tower Speakers
  
  By Garys929, June 1, 2018
  - 3 comments
  - 1,477 views
  - Comment by Mbski
  - April 28, 2019
- dual alternator and battery relocation
  
  Year: 2008 Brand: Malibu Model / Trim: 247 lsv Cost: $500-$999 DIY or Professional Install: I installed it
  
  By 2008_247lsv, May 30, 2018
  - 6 comments
  - 2,698 views
  - Comment by TimbrSS
  - April 30, 2019
- completely rebuild of 83 supra rider
  
  Year: pre 1985 Brand: Supra Model / Trim: rider Cost: $3500+ DIY or Professional Install: I installed it
  
  By 2008_247lsv, May 29, 2018
  - 2 comments
  - 2,646 views
  - Comment by TFreeman
  - April 30, 2019
- Project fix up rotten trailer .
  
  Year: 1994 Brand: Other (include in description) Model / Trim: Zieman Cost: $500-$999
  
  By CALIV210, May 22, 2018
  - 6 comments
  - 1,700 views
  - Comment by CALIV210
  - April 29, 2019
- Hyrdrodyne Helm Refresh
  
  Year: 1995 Brand: Other (include in description) Model / Trim: Closed Bow DD Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio
  
  By Wylie_Tunes, May 19, 2018
  - 5 comments
  - 1,887 views
  - Comment by DaveGerbZ
  - May 11, 2021
- Kojak's Tribal Delete & Graphics Install
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Cost: $500-$999 DIY or Professional Install: I installed it
  
  By Kojak, May 16, 2018
  - 4 comments
  - 5,305 views
  - Comment by Kojak
  - April 30, 2019
- Kojak's Swim Platform Pad Install
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Cost: $250-$499 Platform Type: Fiberglass
  
  By Kojak, May 16, 2018
  - 0 comments
  - 1,523 views
  - Added by Kojak
  - May 16, 2018
- Kojak's Exile Stereo Build
  
  Year: 2006 Brand: Malibu Model / Trim: 23 LSV Cost: $3500+ DIY or Professional Install: I installed it Sound Project Components: Upgraded Amps, Upgraded Cabin Speakers, Upgraded Tower Speakers, Upgraded Subwoofer / Box
  
  By Kojak, May 16, 2018
  - 3 comments
  - 1,795 views
  - Comment by SurfPixie
  - April 28, 2019
- Replacing the steering cable on a Vdrive (centurion avalanche)
  
  Year: 2005 Brand: Centurion Model / Trim: Avalanche Cost: $0-$249 Engine Type: 350 MPI towsports
  
  By rhino89523, May 8, 2018
  - 0 comments
  - 4,076 views
  - Added by rhino89523
  - May 8, 2018
- Dark Blue Gelcoat Restoration
  
  Year: 2005 Brand: MB Sports Model / Trim: B52 V Cost: $0-$249
  
  By hot4teach, May 4, 2018
  - 3 comments
  - 1,852 views
  - Comment by hot4teach
  - April 29, 2019
- Wakeboard Bench
  
  Year: 1999 Brand: Malibu Cost: $0-$249 DIY or Professional Install: I installed it
  
  By Jhartt3, May 3, 2018
  - 2 comments
  - 3,457 views
  - Comment by Jhartt3
  - April 30, 2019
- 1 to 4 Piece Bench Seat/Jump Seat Conversion
  
  Year: 2013 Brand: Malibu Model / Trim: Response TXi Cost: $0-$249 DIY or Professional Install: I installed it
  
  By Bubonic, May 1, 2018
  - 3 comments
  - 3,293 views
  - Comment by TFreeman
  - May 7, 2018
Visit the SHOP TALK forums to join discussions on fabrication, design and more

Sign In

Muffler delete.

User Feedback

Recommended Comments

Rugger 683

Link to comment

Share on other sites

TFreeman 111

Link to comment

Share on other sites

Toddgordo 0

Link to comment

Share on other sites

TFreeman 111

Link to comment

Share on other sites

TFreeman 111

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Featured Products

Tell a friend

Most Completed Projects

Recently Updated Completed Projects