With this build, we started out with two pair of Wet Sounds Rev-10, 3 pair of XS-808 and one XS-10FA driven by an SD-2 and SD-6 all OEM installed. We added RGB LEDs on the interior and tower speakers and upgraded the tower wiring along the way to two 4-conductor 12ga cabling. Added 3 pair of RGB LED rings to the interior speakers and sub woofer.
Now for the good stuff. We added a 2nd Wet Sounds SD-6. Between the two SD-6, we are driving the 4 Rev-10 each bridged across two chnls for a potential of 585W rms. This leaves us 2 chnls for the bow 808's and 2 chnls for the main cabin 808's. Each dialed to about 145W rms.
With the now open SD-2, we built a new custom woofer enclosure and loaded it with a Kicker Comp VR104. We swapped the OEM 10Fa for a 2nd Comp VR104. Bridged on the SD-2 for a total of 1250W rms split between them.
We tied it all together with a WS-420SQ in a billet under dash mount
.thumb.jpeg.d318255b96edd9f88e9a0da37ff83595.jpeg)
.thumb.jpg.d6e1f49476f0797b86e8afb53e7c3295.jpg)
Visit the
Recommended Comments
There are no comments to display.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now