Wylie_Tunes

All said and down, the OEM head unit was all that remained. The Build consisted of: 3 pair Wet Sounds XS-650RGB wired for blue 2 pair Rev-10 with blue LEDs. They started as white pods and we custom painted gloss black and moto green to match the boat Jl Audio 12W7 in custom ported enclosure under the helm. No loss of leg room with TONS of boom! Driven by a JL HD1200/1 Two Wet Sounds SD-6 to drive the two pair Rev-10 and 3 pair of XS-650. 40A 3 bank Xantrex charger taking care of the original group-24 cranking battery and a pair of Interstate 6V golf cart batteries for about 260 Ah of play time bringing it all together is the Wet Sounds WS-420SQ

This boat started with no tower speakers but the stock 12" rockford marine woofer, 2 pair 8" in-boats and 2 pair 6.5" in-boats. OEM installed 400/4 4 chnl driving all 8 in-boats and 300/2 driving the woofer. Step 1) build a proper sealed enclosure for the OEM rockford woofer. This is actually a decent woofer with a proper enclosure and some solid power. The woofer is bridged on 2 chnls of a Wet Sounds SD-6 for a potential of 585W rms. Thats nearly 2X the factory amp. 2) installed two pair Wet Sounds Rev-10 and their dual G3 brackets with two 4-conductor 12ga, with orange LEDs These are driven by two Wet Sounds SD-6 with a potential of 585W rms to each. 3) Rewired the main cabin 8" to the remaining two chnls of the 2nd SD-6 for 145W rms to each rockford 8". 4) Rewired the 2 pair of 6.5" speakers to the original 300/2 for 75W rms to each. 5) We wrapped it all up with a Wet Sounds WS-420SQ in their underdash mount 6) Installed remote charger shore power port in rear locker for easy access 7) Installed orange LEDs around the under side lip of the swim platform, in the front and rear vents, behind the interior emblems, in the driver storage pocket. For the cup holders, we did an orange and UV puck for s different look. 😎 We added a 2nd house battery for 2X the anchor play time

With this build, we started out with two pair of Wet Sounds Rev-10, 3 pair of XS-808 and one XS-10FA driven by an SD-2 and SD-6 all OEM installed. We added RGB LEDs on the interior and tower speakers and upgraded the tower wiring along the way to two 4-conductor 12ga cabling. Added 3 pair of RGB LED rings to the interior speakers and sub woofer. Now for the good stuff. We added a 2nd Wet Sounds SD-6. Between the two SD-6, we are driving the 4 Rev-10 each bridged across two chnls for a potential of 585W rms. This leaves us 2 chnls for the bow 808's and 2 chnls for the main cabin 808's. Each dialed to about 145W rms. With the now open SD-2, we built a new custom woofer enclosure and loaded it with a Kicker Comp VR104. We swapped the OEM 10Fa for a 2nd Comp VR104. Bridged on the SD-2 for a total of 1250W rms split between them. We tied it all together with a WS-420SQ in a billet under dash mount