-
Posts
198 -
Joined
-
Last visited
-
Days Won
19
Content Type
Shop Talk
Gallery
Marketplace
Downloads
Articles
Completed Projects Database
Blogs
Events
Profiles
Project Comments posted by Shadetreefab
-
-
3 minutes ago, freeheel4life said:
Shadetree for the win as always!! Would love to pick you brain over some beers/cocktails one day. Just when I think Im killing it you remind me theres guys that have forgotten more than I know now 🙄🙄🤦♂️🤦♂️🤣😂.
That’s only because I don’t post the first threes times I tried it and messed up. If your ever in nor cal hit me up
-
3 hours ago, JWALL said:
Unreal !!!! I feel just stupid for my little LED post.......just sick !!!!!!!!! Nice work
the cup holder where easy, splitting open the speakers to change boards was hard. And thank you
-
4 hours ago, Rugger said:
Sick! That looks better than external rings for sure. Nice write up. Hole saws and hdpe? Never thought of that. Genius.
That last pic with a bazillion lights... pretty sure all you’re missing is a stripper pole.
Not going lie, I got one drawn up, but the mats are Lil pricy. It might get nuts with 2812’s instead of 5050’s too
-
Just want to add that after install this is the driest my boat has ever been, first time out I thought my bilge pump broke.
-
Just did this install, it’s a tight fit, now to figure out how to get blood out of carpet
- 1
-
On 2/5/2020 at 9:00 AM, Rugger said:
Nicely done. I'm in store for new bunks soon I think. I'm the guy lucky enough to have my wife back the boat into water... so I never see the bunks with the boat off. I forget to check them. But ...2007 trailer... probably should do that!
Thanks for the great write-up!
Me to, tell I got to the lake with the boat sitting on the fenders and spare tire.
-
Dam!, don't know you were doing a center exit!, your crazier then I thought.
-
-
4 hours ago, Wylie_Tunes said:
Kicker now has a 9" and 11" HLCD. The KMTC9 and KMTC11 https://www.kicker.com/kmtc-horn-loaded-tower-systems
Swivel clamps, RGB LEDs, white or black pods.
Others that make an 8" HLCD; Bazooka (way before exile got into marine audio), Rockford Fosgate, Powerbass, Memphis Audio, Roswell Wake Air, Skylon Vector, MB Quart, Could almost include the Bullet Hollowpoint 7.7.
Have you got a chance to get your hands on those kickers? If so how do you fill the stack up to some rev 10's?
-
Haha, that brings back memory's of when I put my hallet back on with a 310 John Deere.
-
Drill drain holes in the bottom of your 90's so water can get out.
-
-
I have the same boat as rugger, last weekend I surfed them back to back. I'm running tsunami suck Gate at around 4K ballast. I've been told by every one that's rode my boat it's good, long wave. Ruggers boat with over 1k less ballast was real close to mine. They work great. Wave forms fast and solid. I'm building a set this winter if I get time for sure. And they toltaly look better then factory.
- 1
-
It looks even better in person and they work as good as they look
-
8 hours ago, Hyperryd said:
That's great man. I can't even get the parts for $40, but the best part is I just saved 15% on my car insurance with Geico while reading your reply. Thanks!!
But did you stay at a holiday inn express last night
- 1
-
1 hour ago, MartinArcher said:
That turned out great. Love the panel mount connectors for plugging in the ballast hoses. I've got something similar but I don;t think those connectors were around at that point. I might have to upgrade mine. Nice job.
https://www.bakesonline.com/detail.aspx?ID=3803
used this on the back
https://www.wakemakers.com/wakemakers-1-drylok-bag-fitting.html
and these on the front, I want to change them to the ronix ones with the caps though. Bend/shape ss plate to fit, then drilled it with a hole saw and debur, used 4200 for thread sealer just so I wouldn't have to worry about it.
- 1
-
-
20 hours ago, Jetdriver said:
That is awesome! Now I gotta figure out a way to wire my table, thanks a lot
If I get a chance this weekend I'll get some more pics and show how/what I did a bit better.
-
I'm sure I'll have some questions for you when your auto gates are all done and sorted.
-
The table started as a joke one night me, the wife and a friend where having a couple adult bev's, they said I couldn't do it, had to prove them wrong.
- 1
Internal cup holder rings
-
-
-
-
-
in Interior Updates & Refinish Projects
Posted
Laser projectors