-
Posts
15 -
Joined
-
Last visited
Content Type
Shop Talk
Gallery
Marketplace
Downloads
Articles
Completed Projects Database
Blogs
Events
Profiles
Project Comments posted by Cameron Eisenhaur
-
-
Nice install. I ran 1.5” suctions and split the discharges to two 1 inch because of the bag connections not being able to have 1.5s yet. It’s scary how much water these move. I bought 35 amp pop fuses I got from Amazon. They’ve been drawing about 26amps each. The OEM relays were 35 so I am going to see if this will hold. I got a bunch of pvc fittings from grainger affordable too if you end up doing the other side.
-
Fantastic work. If you ever sell one of these I’d probably buy one. I just swapped my mefi 4a for a 5. And I thought that was a decent amount of research into I/O’s, this is next level, Love the look!
-
That’s a huge help, thank you!! If you need any random parts for your boat I have a Spare parts boat 2006 x30 that I’m taking parts from, a lot should fit if you need to find stock parts
- 1
-
Very well detailed, the step by step procedures will really help someone who isn’t as comfortable around wrenches take this project on.
I have an 06 x30 with a used horrible trailer I’ll be doing the same to, as well as the a whole rebuild to the boat, do you have a parts list for your conversion? I’d love to order these up.
-
They look fantastic! Im about to gut my x30 for an overhaul; Any chance you would be interesting in making and selling me a set?
Talulah High Flow Ballast Pump install
-
-
-
-
-
in Ballast Projects
Posted
They’re considerable larger than the 88lb/min stock I had so I build this little mount for them to hide behind the back panel. I planned on doing a post when I finished but I had an exhaust valve stick and bend about 10 hours after break in. Im rebuilding the top end again in the water and that’s been taking my time this week. I love boats.