Jump to content
  • projects-database-banner3.png

  • Share your completed boat projects!  DIY or Professional Installs

    Imagine a single giant database of boat projects for all brands, organized by category, boat type or budget.   Share your projects, find inspiration for a new upgrade, or learn the basics or low budget solutions from projects before you.   We can all share and learn from each other in one place.  

    No project is too plain, cheap or lame to post... all will be helpful to someone.  Let's build this!!!!

    Please register or log in first:

    1) Pick a category

    2) Click "Add New Project"

    3) Update your project anytime!

    ***Professional Shops are also welcome to showcase custom work for any category, but you must designate your company name under "installation shop"  with included info.

  • Sign in to follow this  

    Hyrdrodyne Helm Refresh


    Wylie_Tunes
    • Year: 1995 Brand: Other (include in description) Model / Trim: Closed Bow DD Cost: (unspecified) DIY or Professional Install: Professional Install Installation Shop: Mikes Liquid Audio

    Not a huge project. My buddy picked up a mid 90's Hydrodyne closed bow DD this winter. Really good shape for its age. 

    The dash hood vinyl had been removed and the helm panel and gauges were in rough shape. Both speedo pickups need replaced, oil pressure sender for gauge had been tossed in place of a manual gauge laid on top of the engine. 

    We had the hood re-skinned by J&J Upholstery right across the street from me. The boat owner took the gauge panel and did some fab work on it to fit the new gauges (not all were an exact fit as the old), eliminated the clock and make the hole smaller to fit a dual USB charge port with meter. Once that was done, we wrapped in carbon fiber vinyl. 

    Gauge package included 2 new speedo, tach, fuel, volt, oil and temp. 

    Still working on getting an accurate oil pressure reading. Right now, the gauge pegs at 80, so still trying to find the correct sender

    Single battery setup that had a large parasitic drain. Traced it to head unit. Added an ON-OFF battery switch, so problem solved as everything else about the head unit works. 

    Two new speedo pickups and vacuum tubing run for the new gauges. 

    Also re-skinned the glove box lid to match the dash hood.

    Other then getting the proper oil sender, she's ready for lake test. 

    IMG_20180519_125616164_LL.jpg

    Sign in to follow this  


    User Feedback

    Recommended Comments

    Having the part and wrap warm really helps. Set in the sun or in a warm room. Large pieces like that are easier with 2 people. One to hold and peel while the other smooths out. A plastic bondo spreader work great for laying down and pushing out any bobbles. . 

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...