Jump to content
  • projects-database-banner3.png

  • Share your completed boat projects!  DIY or Professional Installs

    Imagine a single giant database of boat projects for all brands, organized by category, boat type or budget.   Share your projects, find inspiration for a new upgrade, or learn the basics or low budget solutions from projects before you.   We can all share and learn from each other in one place.  

    No project is too plain, cheap or lame to post... all will be helpful to someone.  Let's build this!!!!

    Please register or log in first:

    1) Pick a category

    2) Click "Add New Project"

    3) Update your project anytime!

    ***Professional Shops are also welcome to showcase custom work for any category, but you must designate your company name under "installation shop"  with included info.

  • Manual Surf Gate Project


    Sunset Surfer
    • Year: 2002 Brand: Malibu Model / Trim: 23 LSV Device Type : Gate Style Surf Device Material: Starboard or a HDPE Control: Manual or Fixed (No Actuators) Cost: $250-$499 Platform Type: Fiberglass

    I started with an idea, mostly because I didn't have $130,000.00 for a new surf boat. I thought I would do some research and found I was way behind, many people have already done it. I found a boat like mine which is a 2002 Malibu 23 LSV stepped design hull and saw what he did and asked some questions and he was very responsive. He said to get some foam board from the local stationary store so I did and got started on a design along with some tape etc. I was able to come up with some brackets. Made them out of 1/8" stainless had a local muffler shop fab them up for me. I can weld but I don't have a tig welder only a mig welder and stainless is tough to cut drill etc. so it is worth paying to have them made. Bought some 4" stainless steel hinges from ebay and I'm off and going.

    Bracket 1.jpg

    bracket 2.jpg

    Here are some more pictures of my first attempt at the gates I made the mistake of making the hinge stick out too far, so I had to add a contour piece to it to fill in the hole. I used Bimini spring clips for the temporary stainless steel pole I'm using for now. It is attached to my upgraded 2006 swim platform I modded to fit my 2002.

    side view.jpg

    side view 2.jpg

    temp pole clip.jpg



    User Feedback

    Recommended Comments

    Nice job.   That stepped transom is a pain but glad the bracket solved the problem.   There are quite a few similar shaped transoms out there where that bracket would work, including Centurions, Malibu LXis and some Nautiques.   You'll be stoked when you get those actuators on there.

    • Like 1

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

×
×
  • Create New...