Jump to content
  • projects-database-banner3.png

  • Share your completed boat projects!  DIY or Professional Installs

    Imagine a single giant database of boat projects for all brands, organized by category, boat type or budget.   Share your projects, find inspiration for a new upgrade, or learn the basics or low budget solutions from projects before you.   We can all share and learn from each other in one place.  

    No project is too plain, cheap or lame to post... all will be helpful to someone.  Let's build this thing!

    Please register or log in first:

    1) Pick a category

    2) Click "Add New Project"

    3) Update your project anytime!

    ***Professional Shops are also welcome to showcase custom work for any category, but you must designate your company name under "installation shop"  with included info.

  • Complete Ballast Overhaul - 2006 Moomba XLV


    Jase
    • Year: 2006 Brand: Moomba Model / Trim: XLV Cost: (unspecified) Ballast Modifications: Fat sac(s), Pump(s), Hose, Switches, Wiring, Fittings DIY or Professional Install: I installed it / created it
     Share

    After enjoying our first season surfing on our new-to-us 2006 Moomba XLV last summer, I was ready to overhaul the terribly slow stock sprinkler valve/aerator pump/manifold ballast system Moomba used.  So this Spring, I set out to redesign the system.  Huge shout out to @TimbrSS for his help, as I used his project and advice along the way.

    Overall, I added 2 new Wakemakers 1140# bags in each rear locker, kept the stock Gravity Games front 1180# bag in the ski locker, and re-purposed one of the stock 400# bags to a driver's side midship placement, since my family all surfs goofy.  Each bag is filled/drained with 1" lines and by its own Johnson reversible pump. I used a slower Jabsco pump for the 400# bag.  I had a pump rack custom built and painted by my crafty neighbor... thanks Jerry!!

    Here's the details:

    Step 1: Tear out the stock system... Here's a stack of some of its parts.

    IMG_0413.jpg.7e2b4b504054cba7465a2880f8ccabc3.jpg

     

    Next, I ran the electrical.  I used 10 awg wire from the Blue Seas Fuse Block to the stock Carling Switches, and then to the pumps.  I swapped out a stock ACC switch cover for a custom midship switch cover I designed from Rocker Switch Pros.  I still need to run my cable from my house battery to the fuse block.

    IMG_0399.jpg.78879a195211c7df6ba8eb274ed93261.jpg

    IMG_0400.jpg.fc27feba1e884aa96e16de758b8f2b2d.jpg

    IMG_0402.jpg.4f85f9df8deffcfdedc98934f6d6580e.jpg

    IMG_0272.jpg.87632975a179369a8ebce591497e9ade.jpg

    IMG_0273.jpg.8fbe9ee9446d01a8fe84936c0cbe3903.jpg

    IMG_0407.jpg.f78223d44b6c775afd1b3d46d773c970.jpg

    IMG_0406.jpg.1ea4be6a059c5f459fa65d351307c7e0.jpg

     

    On to cutting holes... I used the stock 3/4" thru hull/ball valve from the original manifold system for the Jabsco/Midship pump and bag.  Then, I added 3 new 1" thru hulls/valves for the other pumps.  I cut 2 on the driver side of the v-drive (which I staggered for a hopeful reduction in flow interference if I'm trying to fill on the move), and another on the other side of the v-drive (behind the raw water scupper intake so not to cause any interference with that intake) ... 4 thru hulls total.  For the vents, I had to drill 1 new vent for the midship bag, and had to enlarge all others for my new vent thru hulls... I wanted to remove the stock plastic ones and have all others match to give a clean look.  I had to use a deep socket to guide the hole saw into the pre-existing holes to enlarge them.  When it came to tightening down the ball valves and fill/drain thru hulls, I had to create a key to fit inside the thru hulls from a 5/8" deep socket, with a notch I ground into the middle.

    IMG_0281.jpg.fb25d01ccbbb30c42482b0f80a7fb5a2.jpg

    IMG_0297.jpg.5cf44d4e171afccdd1bb52925c653bba.jpg

    IMG_0298.jpg.073a2803b66a714c9e080699e5cc0484.jpg

    IMG_0299.jpg.8351d9827b8baf2df37c0ce5ea6ba31c.jpg

    IMG_0411.jpg.405974dcc2590f9bae886c1ca03973a6.jpg

    IMG_0410.jpg.93df81251594b1d1c0d01e968e440329.jpg

    IMG_0294.jpg.8e0757319748693706adb3af7e7ec164.jpg

    IMG_0295.jpg.e30942784851b3c9375069998e54e6aa.jpg

    IMG_0301.jpg.41697ecbd172dc8e795a4e154c9ae322.jpg

    IMG_0394.jpg.8432d557902ee57f51b332bac2f46791.jpg

    IMG_0393.jpg.c0263ed84a3490714eb64ef32b3e6918.jpg

     

    For my pump location, I designed a rack similar to @TimbrSS and had a neighbor weld, prime, and paint a custom 4 pump rack to hang the reversible pumps on.  Then I installed the pumps on the rack, wired them up, and then mounted the rack to the transom.  I looped my wiring at the pumps to leave room for future changes (I wanted to order up some deutsch connectors for this but was ready to save some coin by this point), and did it in a way that I could fit the loops behind the top lip of the stock transom cut out. I wanted to 

    IMG_0252.jpg.3f91baa0b5a4ab909930f745e89f5b7a.jpg

    IMG_0253.jpg.6e7414191438d0c3e0fd90d4d8f87e81.jpg

    IMG_0300.jpg.5cc836f6b628e6101a98a12746839691.jpg

    IMG_0305.jpg.41f30dd0d25a0c44fa9cebd60459840c.jpg

    IMG_0332.jpg.78732b2d17f7025015e36a43d961fd2d.jpg

    IMG_0339.jpg.7a815a7e8a6b77b24727ae1acf735e7d.jpg

    IMG_0340.jpg.b2ec5d3d23fdc5d4fd3c327447f7b909.jpg

    IMG_0341.jpg.ed1fc1407416e9e0a13ff17c59789e03.jpg

     

    Last, I routed all of the new 1" lines and new fittings for fill/drain, re-purposed some of the 3/4" stock system line and fittings for vents, and threw the bags into their lockers.

    IMG_0362.jpg.e6b06c77300bdce3a6046f771b16fd3c.jpg

    IMG_0408.jpg.b2081db5977ca3c019ea0a7adb8f46a3.jpg

    IMG_0391.jpg.dcd8589b49d68830c8c54f6a6acab30c.jpg

    IMG_0395.jpg.d1e65865c3a3d571e939e00cb1404a19.jpg

    IMG_0396.jpg.d5dda6d55a0bbc16e435c8d989dd29cb.jpg

    IMG_0397.jpg.efb9fd4d051d6f7ad0f8c8b1e0c74738.jpg

    IMG_0398.jpg.d0f98e5ab55a7d8c4d45021560cc64ee.jpg

     

     

    IMG_0414.jpg

    IMG_0392.jpg

     Share


    User Feedback

    Recommended Comments

    Good job,  I already added four 1" through the hull inlets with shutoff valves to my 2008 Mobuis, but used the aerator style pumps mounted directly above each shutoff valve.  It works pretty good except sometimes the pumps are air-locked and do not pump right away.  I I am considering changing to your configuration.  I do not understand why you have made mods to the outlet ports as I would think they would not be used anymore with reversible pumps.  What am I missing?

    • Thanks 1
    Link to comment
    Share on other sites

    @JEVERS76 Thanks, good question. The outlet ports (or thru-hull vents) serve as vents for each bag.  Even if you switch the reversible pumps, you'll still need a vent for each bag.  I modified my vents for 2 reasons:

    1. I added a fourth bag (400lb under midship bench seat behind driver), so had to drill for that.

    2. I wanted all of my vent thru-hulls to match, and liked how the cheap plastic "chrome" gave a cleaner look.  They are larger than the stock black plastic vents, so had to re-drill the original holes.  I think it was 1 5/16".... wakemakers website explains it.

    • Like 1
    Link to comment
    Share on other sites

    22 hours ago, JEVERS76 said:

    It works pretty good except sometimes the pumps are air-locked and do not pump right away.  I I am considering changing to your configuration.

    Likely just need to reorient the fill pumps that are air locking. 

    • Like 1
    Link to comment
    Share on other sites

    Does it matter if the impeller pumps are not mounted at or below the waterline?  I would think on emptying that you would always want water at the pump to lubricate the impeller.  Have you burnt up impellors?

     

    Link to comment
    Share on other sites

    On 9/30/2021 at 10:57 PM, hman89 said:

    Does it matter if the impeller pumps are not mounted at or below the waterline?  I would think on emptying that you would always want water at the pump to lubricate the impeller.  Have you burnt up impellors?

     

    These pumps are not waterproof, so you do not want to mount them below the normal water line. If the bilge fills, it can damage the pumps. 

    There will be water in the pump head, until the sac/tank is empty. With the synthetic impellers, burned impellers are rare, but if left on running dry long enough, they can burn up. 

    Link to comment
    Share on other sites



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Featured Products

  • Tell a friend

    Love Wake Garage? Tell a friend!
×
×
  • Create New...