Ninetysixsurfer

So if you are cheap like me, u can do the 500$ conversion for 100$. All I did was order the carter p5000 from summit racing. https://m.summitracing.com/parts/crt-p5000 Then I removed return to pump line from the bracket and plugged it with 7/16 x24 fitting plug. I spliced a new connection and put it back together and it's been good.

I used rigid insulation from Lowes, fiberglass(bondo brand), two part epoxy, bondo filler, bondo fiberglass resin, 2" Velcro, and I painted with flex seal. I started with making a template. I followed 30 degree angle with a triangle with 20x15x10 inch sides. I cut four triangular pieces of two inch foam and laminated them together. I sanded all sides really well, then cut fiberglass and epoxied first layer. The eps foam will melt if you use resin. But after the epoxy layer I used a more inexpensive resin for a couple more layers. Then used bondo filler to smooth and fill some uneven spots. Lots of sanding involved before painting and spraying with flex seal( I wouldn't use flex seal again it marks boat and has got sticky/messy). Finally, I put Velcro on its side and both sides of my hull. It works really well! I'll take more pics if anyone's interested. I'd incorporate a cut in handle and a breather valve but it's worked for a couple seasons now. I don't use spacer in pic, I just let the shaper hanger down over the step in my hull. I fill my rear and ski lockers and cheat some lead to surf side.