You will also need to verify if you have the required space for the actuator. You need at least 11in of straight clearance to fit the actuator. That's the «bugger» in all the older nautiques.
Similar to my 230 and 220 project, I was asked to work on the pre-nss generation of Nautique 210.
Took measurements, made templates, adjusted everything and made a prototype.
Will be installing everything very shortly.
I had them cut by a friend who has a laser shop. I did all the drawings and testing.
Even my plastic shims are laser cutted. He also has a small break so he can bend my brackets.
Here's another system I made for a 220
The first North American surf kit for the 220 is here. Here are some pictures of the kit during development and installation. The setup is basically similar to my 230 kit but adapted to the 220 transom. It uses the same actuators and switch. All made of 304 stainless. Water testswent real good and wake is clean. Operates nicely and can be switched on the fly.
Let me know what you think!